Autoseal® RC-3007 Black Coating Where To Buy
Product Information
Autoseal® RC-3007 Black coating is a water-based, weatherstrip coating designed for use on EPDM sponge seals to reduce noise (squeak & itch) from automotive vibration and impart ice-release characteristics. Autoseal RC-3007 Black coating is part of a two-pack system that uses Autoseal RC-804B or RC-805B hardener.
Shelf Life
Shelf life is six months from date of shipment when stored in a well ventilated area at 21-27°C (70-80°F) in original, unopened container. Do not freeze product. Keep container closed when not in use.
Features and Benefits
Environmentally Recommended - provides a low VOC coating.
Excellent Ice-Release - prevents ice from sticking to coated rubber.
Noise Reduction - reduces anti-static squeak and anti-itch noise from automobile vibration.
Typical Properties*
| Appearance | Black Liquid |
|
Viscosity, mPa·s/cps @ 25°C (77°F) Brookfield LVT Spindle 3, 30 rpm |
400-1200 |
| Density, kg/m3 (lb/gal) | 1010 (8.43) |
| Solids Content by Weight, % | 28.5-32.5 |
| Flash Point, °C (°F) | ≥93 (≥201) |
*Data is typical and not to be used for specification purposes.
Auxiliary Products
| Autoseal<sup>®</sup> 3690 Primer |
|
aqueous primer that provides good adhesion to EPDM rubber and various thermoplastic elastomers Features and BenefitsEnvironmentally Friendly - provides a user friendly, low VOC coating. Good Adhesion - adheres well to EPDM. Convenient - applies easily using conventional, siphon, HVLP or needle-less spray methods. |
| Chemlok<sup>®</sup> 459X Primer |
|
primer for TPE/TPO/EPDM Features and BenefitsVersatile - enhances adhesion to difficult-to-bond elastomers, increasing the adhesion of coatings, double-sided tape and adhesives. Easy to Apply - low viscosity allows for easy application; no dilution necessary. |