Autoseal® 3690 Primer Where To Buy
Product Information
LORD Autoseal® 3690 is an aqueous primer that provides good adhesion to EPDM rubber and various thermoplastic elastomers.
Shelf Life
Shelf life is six months from date of shipment when stored at 21-27°C (70-80°F) in original, unopened container. Do not freeze product. Keep container closed when not in use. Unused primer can be sealed and reused.
Features and Benefits
Environmentally Friendly - provides a user friendly, low VOC coating.
Good Adhesion - adheres well to EPDM.
Convenient - applies easily using conventional, siphon, HVLP or needle-less spray methods.
Typical Properties*
| Appearance | Clear, Opaque Liquid |
|
Viscosity, cps @ 25°C (77°F) Brookfield LVT |
15-35 |
| Density, kg/m3 (lb/gal) | 994.5-1030.5 (8.3-8.6) |
| Solids Content by Weight, % | 10.9-13.9 |
| Flash Point, °C (°F) | >93 (>200) |
*Data is typical and not to be used for specification purposes.
Auxiliary Products
| Autoseal<sup>®</sup> 3463B Hardener |
|
hardener used with Autoseal water-based coatings to enhance performance of the cured system Features and BenefitsEnvironmentally Recommended - provides low VOC for reduced emissions and improved environmental compliance. Easy to Use - prepackaged kits include hardener and resin in the proper ratio. Convenient - requires fewer processing steps as hardener does not need to be pre-diluted with water. Durable - provides good stability in water; enhances solvent resistance of cured Autoseal coatings. |
Literature
| Download | Type | Name | |
|---|---|---|---|
 |
Safety Data Sheet | Autoseal 3690 | |
|
|
Technical Data Sheet | Autoseal 3690 Primer |