LORD® Accelerator 4 Where To Buy
Product Information
LORD® Accelerator 4 is a no-mix curative designed for use with LORD acrylic adhesives. LORD Accelerator 4 can be used with LORD 200 series and 500 series acrylic adhesives.
Shelf Life
Shelf life is six months when stored at 40-70°F (4-21°C) in original, unopened container. Exposure to temperatures greater than 80°F (27°C) will shorten shelf life.
Features and Benefits
Convenient – provides room temperature cure with all LORD acrylic adhesives.
Extended Work Time – provides extended assembly time as adhesive does not begin cure until it comes in contact with surface coated with dry accelerator.
Easy to Apply – applies easily by brush, wipe, spray or dip methods onto one or both bonding surfaces.
Fast Cure – dries in approximately one minute to an off-white crystalline film.
Environmentally Resistant – resists common environmental conditions when used with LORD acrylic adhesives.
Typical Properties*
| Appearance | Clear to Opaque, Colorless to Amber Liquid |
|
Viscosity, cP @ 77°F (25°C) Brookfield LVT Spindle 3, 12 rpm |
<10 |
| Density, lb/gal (g/cm3) | 10.2-10.7 (1.22-1.28) |
| Solids Content by Weight, % | 10 |
| Flash Point, °F (C) | >200 (>93) |
*Data is typical and not to be used for specification purposes.
Literature
| Download | Type | Name | |
|---|---|---|---|
 |
Safety Data Sheet | LORD ACCELERATOR 4 | |
|
|
Selector Guide | LORD Structural Adhesives Selector Guide | |
|
|
Technical Data Sheet | LORD Accelerator 4 |