LORD® Accelerator 26 Where To Buy
Product Information
LORD® Accelerator 26 is a no-mix curative designed for use with LORD acrylic adhesives. LORD Accelerator 26 can be used with LORD 200, 500 and MaxlokTM series acrylic adhesives.
Shelf Life
Shelf life is six months when stored at 40-70°F (4-21°C) in original, unopened container. Exposure to temperatures greater than 80°F (27°C) will shorten shelf life.
Features and Benefits
Convenient – provides room temperature cure with all LORD acrylic adhesives.
Extended Work Time – provides extended assembly time as adhesive does not begin cure until it comes in contact with surface coated with dry accelerator.
Easy to Apply – applies easily by brush, wipe, spray or dip methods onto one or both bonding surfaces.
Fast Cure – dries in approximately 15 minutes to an off-white crystalline film.
Environmentally Friendly – does not contain chlorinated solvents.
Environmentally Resistant – resists common environmental conditions when used with LORD acrylic adhesives.
Typical Properties*
| Appearance | Clear to Opaque, Colorless to Amber Liquid |
|
Viscosity, cP @ 77°F (25°C) Brookfield LVT Spindle 1, 30rpm |
<10 |
| Density, lb/gal (g/cm3) | 7.5 - 8.5 (0.9 - 1.0) |
| Solids Content by Weight, % | 10 |
| Flash Point, °F (°C) | >109 (>43) |
*Data is typical and not to be used for specification purposes.
Literature
| Download | Type | Name | |
|---|---|---|---|
 |
Safety Data Sheet | LORD Accelerator 26 | |
|
|
Selector Guide | LORD Structural Adhesives Selector Guide | |
|
|
Technical Data Sheet | LORD Accelerator 26 |