Thermoset™ SC-300M Silicone Encapsulant Where to Buy
Product Information
Thermoset™ SC-300M silicone encapsulant is a two-component system designed for encapsulation of delicate electronic components. Thermoset SC-300M encapsulant system cures to an extremely soft, gel-like consistency using either room temperature or heat cure.
Shelf Life
Shelf life of each component is six months when stored at 25°C in original, unopened container.
Thermoset SC-300M hardener evolves minute quantities of hydrogen gas. Do not repackage or store material in unvented containers. Adequately ventilate work area to prevent the accumulation of gas.
Features and Benefits
Low Stress – exhibits low shrinkage and stress on components as it cures.
Excellent Adhesion – provides excellent adhesion to most substrates without the use of a primer.
Durable – composed of an addition-curing polymer that will not depolymerize when heated in confined spaces.
Insulative – provides excellent electrical insulation properties; provides thermal, mechanical and vibration damping.
Typical Properties*
| Mixed Appearance | Clear Liquid |
| Mixed Viscosity, cP @ 25°C | 160 |
| Mixed Specific Gravity | 0.99 |
| Gel Time, minutes @ 25°C | 50 |
| Working Life, minutes @ 25°C | 30 |
| Cure Time |
24 hours @ 25°C; or 16 hours @ 25°C followed by 2 hours @ 100°C |
Cured Typical Properties*
| Thermal Conductivity, W/m∙K | 0.2 |
| Coefficient of Linear Thermal Expansion, ppm/°C @ 25°C | 326 |
| Glass Transition Temperature (Tg), °C | -110 |
| Hardness | Soft Gel |
| Storage Modulus, MPa | 2.75 x 10-3 |
| Volume Resistivity, ohm-cm @ 25°C | 9.9 x 1014 |
| Dielectric Constant, @ 25°C | 2.7 |
| Dissipation Factor, @ 25°C | 0.005 |
*Data is typical and not to be used for specification purposes.
Cure schedule of 16 hours at 25°C plus 2 hours at 100°C.
Literature
| Download | Type | Name | |
|---|---|---|---|
| Safety Data Sheet | Thermoset SC-300M Resin | |
|
| Safety Data Sheet | Thermoset SC-300M Hardener | |
|
|
Technical Data Sheet | Thermoset SC-300M Silicone Encapsulant | |
|
|
Unfilled Addition-Curing Silicone Encapsulant Handling/Application Notes | ||
|
|
Product Catalog | Potting & Encapsulation Materials |