LORD® 600/65 Epoxy System Where to Buy
Product Information
LORD® 600/65 epoxy system is a two-component, general purpose system for use in many applications including adhesive, laminating and electrical/electronic insulation.
Handling and cured properties of the two-component epoxy system are dependent on the hardener used with LORD 600 epoxy resin.
Shelf Life
Shelf life of LORD 600 resin is two years from date of manufacture when stored at 25°C in original, unopened container. If stored or shipped at cooler temperatures, LORD 600 resin may crystallize. If crystals appear, gently warm resin at 50-60°C to melt crystals before mixing with hardener.
Shelf life of Thermoset Hardener No. 65 is one year when stored in a well ventilated area at 25°C in original,unopened container.
Features and Benefits
Low Viscosity – maintains low viscosity for complete and void-free encapsulation.
Excellent Appearance – cures to a high gloss surface, free of “blush” or “sweat-out”; exhibits good mar resistance.
Moisture Insensitive – cured properties obtained even when cured in very high humidity environments.
Uncured Typical Properties*
| Working Life, minutes @ 25°C | 50 |
| Cure Time, hours @ 25°C | 24 |
Cured Typical Properties*
| Hardness, Shore D | 85 |
| Tensile Strength, MPa (psi) @ 25°C | 62.1 (9010) |
| Elongation at Break, % | 4.5 |
|
Moisture Absorption, % 24 hours @ 25°C |
0.22 |
| Volume Resistivity, ohm-cm @ 25°C | 1 x 1015 |
| Dielectric Constant | 4.2 |
| Dissipation Factor | 0.016 |
*Data is typical and not to be used for specification purposes.
Literature
| Download | Type | Name | |
|---|---|---|---|
| Technical Data Sheet | LORD 600 Epoxy Resin | |
|
| Safety Data Sheet | LORD 600 RESIN | |
|
| Technical Data Sheet | Thermoset Hardener No. 65 | |
|
| Safety Data Sheet | THERMOSET HARDENER NO. 65 | |
|
|
Product Catalog | Potting & Encapsulation Materials |