LORD® 600/18 Epoxy System Where to Buy
Product Information
LORD® 600/18 epoxy system is a two-component, general purpose system for use in many applications including adhesive, laminating and electrical/electronic insulation.
Handling and cured properties of the two-component epoxy system are dependent on the hardener used with LORD 600 epoxy resin.
Shelf Life
Shelf life of LORD 600 resin is two years when stored at 25°C in original, unopened container. If stored or shipped at cooler temperatures, LORD 600 resin may crystallize. If crystals appear, gently warm resin at 50-60°C to melt crystals before mixing with hardener.
Shelf life of Thermoset Hardener No. 18 is two years when stored in a well ventilated area at 25°C in original,unopened container.
Features and Benefits
Heat Resistant – provides superior heat resistance for room-temperature cured system.
Uncured Typical Properties*
| Working Life, minutes @ 25°C | 20 |
| Cure Time, hours @ 25°C | 24 |
Cured Typical Properties*
| Hardness, Shore D | 88 |
| Tensile Strength, MPa (psi) @ 25°C | 77.2 (11,200) |
| Elongation at Break, % | 3.6 |
|
Moisture Absorption, % 24 hours @ 25°C |
0.18 |
| Volume Resistivity, ohm-cm @ 25°C | 4 x 1016 |
| Dielectric Constant | 3.8 |
| Dissipation Factor | 0.020 |
*Data is typical and not to be used for specification purposes.
Literature
| Download | Type | Name | |
|---|---|---|---|
| Technical Data Sheet | LORD 600 Epoxy Resin | |
|
| Safety Data Sheet | LORD 600 Resin | |
|
| Technical Data Sheet | Thermoset Hardener No. 18 | |
|
|
Product Catalog | Potting & Encapsulation Materials |