CoolTherm® MG-133 Thermally Conductive Gel Where to Buy
Product Information
LORD CoolTherm® MG -133 thermally conductive gel is a one-component, silicone interface material that exhibits the low thermal resistance properties of a grease while possessing the integrity of a gel.
CoolTherm MG-133 gel is designed to provide efficient heat transfer from flip chip microprocessors, PPGAs, BGAs, microBGAs, DSP chips, graphic accelerator chips, and other high wattage electronic components that are on ceramic substrates. CoolTherm MG-133 gel was not developed for organic substrates.
Shelf Life
Shelf life is six months from date of manufacture when stored at -30°C in original, unopened container. Syringe must be maintained at -30°C in a vertical (upright) position with the dispense tip facing down. Do not store syringe on its side (horizontally).
This material is shipped and stored frozen. Consult handling instructions** for thawing.
** Handling instructions are available on LORD.com.
Features and Benefits
Thin Bondlines - achieves thin bondlines of 1-2 mils,minimizing the thermal pathway and maximizing heat flow.
High Thermal Conductivity - provides high thermal conductivity for applications where superior heat dissipation is required.
Low Thermal Resistance - provides minimal thermal resistance due to low viscosity and good wetting.
High Reliability - provides excellent resistance to moisture and temperature cycling; resists pump-out and cracking.
Reworkability - low modulus at elevated temperatures allows material to be repaired.
Uncured Typical Properties*
| Appearance | Gray Paste |
|
Viscosity, cps @ 25°C Shear Rate 5/sec |
128,400 |
|
Viscosity, cps @ 25°C Shear Rate 10/sec |
105,900 |
| Specific Gravity | 2.9 |
| Working Life, hr @ 25°C | 8 |
| Cure Time |
60 min @ 100°C; or 30 min @ 120°C |
Cured Typical Properties*
| Thermal Conductivity, W /mk | 3.6 |
| Coefficient of Linear Thermal Expansion, ppm/°C | 178 |
| Glass Transition Temperature (Tg), °C | -110 |
| Storage Modulus, Pa @ 25°C | 10,000 |
*Data is typical and not to be used for specification purposes.
Literature
| Download | Type | Name | |
|---|---|---|---|
 |
Technical Data Sheet | CoolTherm MG-133 Thermally Conductive Gel | |
|
|
User Instructions | Electronic Materials Handling Instructions (-30°C Storage Temperature) | |
|
|
Selector Guide | Electronic Materials for LED Applications | |
|
|
Product Catalog | Microelectronic Materials Catalog | |
|
|
Safety Data Sheet | CoolTherm MG-133 |