CoolTherm® EP-6150 Epoxy Adhesive Where to Buy
Product Information
LORD CoolTherm® EP-6150 adhesive is a one-component, thixotropic epoxy adhesive designed for use in the assembly of electronic components and devices.
CoolTherm EP-6150 adhesive offers good adhesion to a wide variety of substrates, and can be used in demanding high-end device assembly applications.
Shelf Life
Shelf life is three months from date of manufacture when stored at 5°C in original, unopened container. Syringe must be stored in a vertical (upright) position with the dispense tip facing down. Do not store syringe on its side (horizontally).
If material is stored at 25°C, shelf life will be shortened to approximately one month.
Features and Benefits
Excellent Stability – provides excellent thermal stability.
Fast Cure – rapidly cures at 121°C and 177°C.
Chemically Resistant – provides excellent resistance to acids and strong bases.
Non-Sag – thixotropic rheology allows shape to be maintained after dispensing.
Uncured Typical Properties*
Appearance | White Paste |
Viscosity, cps @ 25°C | 145,000 |
Specific Gravity | 1.73 |
Gel Time |
10 min @ 121°C 1 min @ 177°C |
Cure Time |
30 min @ 121°C; or 10 min @ 177°C |
Cured Typical Properties*
Volume Resistivity, ohm-cm @ 25°C | >1 x 1015 |
Thermal Conductivity, W/mK | 0.6 |
Glass Transition Temperature (Tg), °C | 141 |
Hardness, @ 25°C, Shore D | 90 |
Lap Shear Strength, psi, AL-AL | > 1600 |
Dielectric Strength, V/mil | 450 |
Dielectric Constant, @ 25°C | 3.9 |
Dissipation Factor, @ 25°C | 0.03 |
*Data is typical and not to be used for specification purposes.