LORD® HPC-3C Coating Where To Buy
Product Information
LORD® HPC-3C coating is a two-component, room temperature curing fluoroelastomer coating which features robust adhesion and exceptional mechanical properties. This coating greatly enhances fuel and fluid resistance for a wide variety of elastomeric substrates.
LORD HPC-3C coating is clear. Coating is composed of a mixture of polymers, organic compounds and fillers dissolved or dispersed in an organic solvent system. LORD HPC-3 Curative is added to LORD HPC-3C coating.
Shelf Life
Shelf life is one year from date of shipment when stored at 21-27°C (70-80°F) in original, unopened container. Do not store or use near heat, sparks or open flame.
Keep the container tightly capped when not in use to prevent solvent evaporation and moisture contamination. Mixed LORD HPC-3 coating and curative has a pot life of one week. Mixtures greater than one week old should be discarded.
Features and Benefits
Excellent Adhesion – provides strong adhesion to substrate and elongation of up to 400%; properly applied coating does not crack or peel. In laboratory testing, coating has demonstrated that it will not peel or crack prior to substrate cracking.
Fluid Resistant – provides fluid resistant barrier to external surface of elastomeric part, allowing bulk of component to be made of less expensive, less fluid resistant material. Resultant system offers low cost, high mechanical properties with high fluid and environmental resistance. LORD HPC-3C coating provides excellent resistance to aggressive fuels and oils.
Convenient – applies easily by spray, brush, dip or roll coat methods; can be easily incorporated into existing production lines. Coating cures at room temperature or with the aid of hot forced air.
Typical Properties*
| Appearance | Clear Liquid |
|
Viscosity, cps @ 25°C (77°F) Brookfield LVT Spindle 2, 30 rpm |
75-300 |
| Density, kg/m3 (lb/gal) | 899.90 (7.51) |
| Solids Content by Weight, % | 20 |
| Solids Content by Volume, % | 10.1 |
|
Flash Point, °C (°F) Seta |
15.6 (60) |
| Solvents** | Methyl Isobutyl Ketone (MIBK), Methyl Ethyl Ketone (MEK) |
*Data is typical and not to be used for specification purposes.
**Maximum water content 500 ppm.
Literature
| Download | Type | Name | |
|---|---|---|---|
 |
Safety Data Sheet | LORD HPC-3C | |
|
|
Technical Data Sheet | LORD HPC-3B and HPC-3C Coatings | |
|
|
Product Brochure/Bulletin/Sell Sheet | Elastomer Adhesives & Coatings for the Oil & Gas Industry |