Chemlok® AP-133 Primer and/or Adhesive Where to Buy
Product Information
LORD Chemlok® AP-133 primer and/or adhesive is a clear one-coat adhesive used to bond unvulcanized silicone rubber to various substrates such as metals, glass, plastics and textiles.
Chemlok AP-133 adhesive also bonds Specialty Materials such as fluoroelastomers, polyacrylates, epichlorohydrin and some peroxide vulcanized elastomers.
Shelf Life
Shelf life is one year from date of shipment when stored at 21-27°C (70-80°F) in original, unopened container. Do not store or use near heat, sparks or open flame.
Features and Benefits
Versatile - provides excellent bonding characteristics between a wide variety of commercially available elastomer stocks and many diverse metallic and nonmetallic substrates.
Environmentally Resistant - creates strong bonds capable of withstanding salt spray, chemicals, oils, solvents, corrosive atmospheres and temperature extremes.
Durable - provides rubber tearing bonds that are stronger than the rubber, at high or low temperatures.
Easy to Apply - applies easily by brush, spray or dip methods.
High Temperature Resistant - withstands temperatures up to 204°C (400°F) and below -51°C (-60°F) when bonding with fluoroelastomers or silicone.
Typical Properties*
| Appearance | Clear Liquid |
| Viscosity, cSt | 0.0-5.0 |
| Density, kg/m3 (lb/gal) | 790.0-830.0 (6.6-6.9) |
| Solids Content by Weight, % | 4.8-6.2 |
|
Flash Point, °C (°F) Seta |
14 (57) |
| Solvents | Methanol, Ethanol, Toluene |
*Data is typical and not to be used for specification purposes.
Auxiliary Products
| LORD<sup>®</sup> LokRelease™ 100 Mold Release |
|
fast curing release agent designed for use with molded elastomers Features and BenefitsProcess Enhancer – provides quick, easy part release from molds; single application allows multiple molding cycles; improves molding efficiency in many processes including injection, compression and transfer molding. Improved Appearance – reduces defects caused by sticking; nontransferable to elastomer compound; does not interfere with compound chemistry. Environmentally Recommended – contains no Class I or Class II ozone depleting substances; contains no 1,1,1 trichloroethane or methylene chloride. |
| LORD<sup>®</sup> LokRelease™ 100EZ Mold Release |
|
fast curing, nontransferable release agent Features and BenefitsProcess Enhancer – provides quick, easy part release from molds; single application allows multiple molding cycles; improves molding efficiency in many processes including injection, compression and transfer molding. Improved Appearance – reduces defects caused by sticking; nontransferable to elastomer compound; does not interfere with compound chemistry. Environmentally Recommended – contains no Class I or Class II ozone depleting substances; contains no chlorofluorocarbon (CFC) or hydrochlorofluorocarbon (HCFC) propellants; contains no 1,1,1 trichloroethane or methylene chloride. |
| LORD<sup>®</sup> LokRelease™ 200 Aqueous Mold Release |
|
aqueous mold release is designed for use with molded elastomers Features and BenefitsProcess Enhancer – provides quick, easy part release; produces low build-up, allowing more production time between mold cleanings; improves molding efficiency in many processes including injection, compression and transfer molding. Improved Appearance – reduces defects caused by sticking; nontransferable, eliminating post-finishing problems. Environmentally Recommended – water-based coating is engineered to prevent rust and corrosion in steel molds. |
| LORD<sup>®</sup> LokRelease™ 300 Silicone-Free Mold Release |
|
silicone-free, nontransferable release agent Features and BenefitsProcess Enhancer – provides quick, easy part release; produces low build-up, allowing more production time between mold cleanings; improves mold efficiency in many processes including injection, compression and transfer molding of most rubber compounds including silicone. Improved Appearance – reduces defects caused by sticking; nontransferable, eliminating post-finishing problems. Environmentally Recommended – water-based coating is engineered to prevent rust and corrosion in steel molds. |
Literature
| Download | Type | Name | |
|---|---|---|---|
 |
Product Brochure/Bulletin/Sell Sheet | Elastomer Adhesives & Coatings for the Oil & Gas Industry | |
|
|
Selector Guide | Chemlok Adhesives Selector Guide | |
|
|
Technical Data Sheet | Chemlok AP-133 Adhesive | |
|
|
Safety Data Sheet | CHEMLOK AP-133 |