Chemlok® 205 Adhesive and/or Primer Where to Buy
Product Information
LORD Chemlok® 205 adhesive is a heat-activated adhesive designed for use as a substrate primer under other Chemlok covercoat adhesives, or as a one-coat adhesive for bonding unvulcanized nitrile elastomer compounds. It is composed of a mixture of polymers, organic compounds and mineral fillers dissolved or dispersed in an organic solvent system.
Shelf Life
Shelf life is one year from date of shipment when stored at 21-27°C (70-80°F) in original, unopened container.
Features and Benefits
Versatile – can be used as a primer under a wide variety of Chemlok covercoat adhesives such as the Chemlok 220 series, Chemlok 230 series, Chemlok 250 series or Chemlok 6000 series adhesives.
Convenient – can be used as a one-coat adhesive to bond some nitrile rubber compounds to rigid substrates during vulcanization.
Easy to Apply – applies easily by brush, dip, spray or roll coat methods; suitable for existing production lines.
Durable – provides rubber tearing bonds and excellent environmental resistance when used in combination with Chemlok covercoat adhesives.
Typical Properties*
| Appearance | Gray Liquid |
|
Viscosity, cps @ 25°C (77°F) Brookfield LVT Spindle 2, 30 rpm |
85 - 165 |
| Density, kg/m3 (lb/gal) | 920.0 - 970.0 (7.7 - 8.1) |
| Solids Content by Weight, % | 22 - 26 |
|
Flash Point, °C (°F) Seta |
14 (57) |
| Solvents | Methyl Isobutyl Ketone (MIBK), Methyl Ethyl Ketone (MEK), Xylene |
*Data is typical and not to be used for specification purposes.
Auxiliary Products
| LORD<sup>®</sup> LokRelease™ 100 Mold Release |
|
fast curing release agent designed for use with molded elastomers Features and BenefitsProcess Enhancer – provides quick, easy part release from molds; single application allows multiple molding cycles; improves molding efficiency in many processes including injection, compression and transfer molding. Improved Appearance – reduces defects caused by sticking; nontransferable to elastomer compound; does not interfere with compound chemistry. Environmentally Recommended – contains no Class I or Class II ozone depleting substances; contains no 1,1,1 trichloroethane or methylene chloride. |
| LORD<sup>®</sup> LokRelease™ 100EZ Mold Release |
|
fast curing, nontransferable release agent Features and BenefitsProcess Enhancer – provides quick, easy part release from molds; single application allows multiple molding cycles; improves molding efficiency in many processes including injection, compression and transfer molding. Improved Appearance – reduces defects caused by sticking; nontransferable to elastomer compound; does not interfere with compound chemistry. Environmentally Recommended – contains no Class I or Class II ozone depleting substances; contains no chlorofluorocarbon (CFC) or hydrochlorofluorocarbon (HCFC) propellants; contains no 1,1,1 trichloroethane or methylene chloride. |
| LORD<sup>®</sup> LokRelease™ 200 Aqueous Mold Release |
|
aqueous mold release is designed for use with molded elastomers Features and BenefitsProcess Enhancer – provides quick, easy part release; produces low build-up, allowing more production time between mold cleanings; improves molding efficiency in many processes including injection, compression and transfer molding. Improved Appearance – reduces defects caused by sticking; nontransferable, eliminating post-finishing problems. Environmentally Recommended – water-based coating is engineered to prevent rust and corrosion in steel molds. |
Literature
| Download | Type | Name | |
|---|---|---|---|
 |
Safety Data Sheet | Chemlok 205 | |
|
|
Product Brochure/Bulletin/Sell Sheet | Elastomer Adhesives & Coatings for the Oil & Gas Industry | |
|
|
Selector Guide | Chemlok Adhesives Selector Guide | |
|
|
Technical Data Sheet | Chemlok 205 Adhesive and/or Primer |