LORD® 810/Accelerator 20GB Acrylic Adhesive - India/SEA only Where To Buy
Product Information
LORD® 810/Accelerator 20GB adhesive is a two-component, acrylic-based adhesive that creates a highly flexible adhesive system for bonding metals and engineered plastics. This structural adhesive system can also be used for solar bonding applications.
LORD 810/20GB adhesive delivers fast cure speed and strong bonding with minimal bondline read-through (BLRT). LORD Accelerator 20GB allows precise control of the adhesive bondline thickness due to its content of glass beads.
Shelf Life
Shelf life is one year when stored below 25°C (77°F) in original, unopened container. Storage temperatures of 4-15°C (40-60°F) are recommended. If stored cold, allow product to return to room temperature before using. Protect from exposure to direct sunlight.
After dispensing product from cartridge, remove the mixing tip immediately and install supplied cartridge plugs to avoid cured adhesive from plugging cartridge.
LORD 810 adhesive is flammable. Do not store or use near heat, sparks or open flame.
Features and Benefits
Versatile – bonds metals, such as aluminum, galvanized steel and CRS, as well as engineered plastics, such as PC, ABS, acrylic, PVC and composites (FRP, SMC); low-exotherm adhesive system can be used for solar rooftop applications such as bonding metal brackets, short rails, long rails, walkways, cable trays and lightening arresters to a metal roof.
Aesthetics – bonds thin and flexible substrates with little to no bondline read-through.
Convenient – requires little or no substrate preparation for bonding metals and plastics; cures quickly even in low temperatures.
Non-Sag – remains in position when applied on vertical or overhead surfaces, allowing for greater process flexibility.
Temperature Resistant – performs at temperatures from -40°C to +149°C (-40°F to +300°F).
Note: Based on test results, LORD 810/20GB adhesive system exhibits post bake/powder coating temperature resistance up to 400°F (204°C) for 90 minutes. Customer specific substrates should always be evaluated for specific application performance.
Environmentally Resistant – resists dilute acids, alkalis, solvents, greases, oils and moisture; provides excellent resistance to indirect UV exposure and weathering; withstands high wind pressure for solar applications
Uncured Typical Properties*
| Working Time, minutes @ 21°C (70°F) | 8 |
| Time to Handling Strength, minutes @ 30-35°C (86-95°F) | 15 |
| Full Cure Time, hour @ 75°F (24°C) | 24 |
| Mixed Appearance | Grey Paste |
Cured Typical Properties*
| Hardness**, Shore D | 40 |
| Tensile Strength at Break**, psi (MPa) | 841 (5.8) |
| Elongation**, % | 190 |
| Glass Transition Temperature (Tg)**, °F (°C) | 109 (43) |
*Data is typical and not to be used for specification purposes.
**Data obtained using LORD 810/20GB cured for 24 hours at room temperature.
Literature
| Download | Type | Name | |
|---|---|---|---|
 |
Technical Data Sheet | LORD 810/Accelerator 20GB Acrylic Adhesive - India/SEA only | |
|
|
Safety Data Sheet | LORD 810 | |
|
|
Safety Data Sheet | LORD Accelerator 20GB | |
|
|
Application Guide | Solar Panel Bracket Bonding with LORD 810/20GB Acrylic Adhesive - India/SEA only |