LORD® 7610DTM Direct-to-Metal Adhesive/Sealant Where To Buy
Product Information
LORD® 7610DTM direct-to-metal adhesive/sealant is a single-component, moisture-cure product offering excellent adhesion to various substrates including many plastics, glass, concrete, wood and metals, especially precoated metals.
Shelf Life
Shelf life is 15 months when stored in a well ventilated area at or below 80°F (27°C) in original, unopened container. Once cartridge has been opened, leave the dispense tip on to act as a seal against moisture.
Features and Benefits
Durable – creates high strengh bonds, replacing mechanical fastening methods; exhibits excellent primerless adhesive properties.
Convenient – requires no mixing; cures quickly even at low temperatures; requires no ovens or other heat sources for curing.
Chemically Resistant – solvent resistant when cured. Painting and most cleaning processes do not affect bond strength.
Non-Sag - remains in position when applied on vertical or overhead surfaces, allowing for greater process flexibility.
Temperature Resistant – uncured material can endure 255°F (107°C) for 60 minutes, and cured material can endure 325°F (163°C) for 60 minutes with no negative effect.
Environmentally Resistant - resists weathering and aging; provides excellent resistance to indirect UV exposure.
Environmentally Recommended - low VOC content; contains no solvent.
Typical Properties*
| Appearance | Whtie, Black or Gray Paste |
|
Skin Time, min @ 77°F (25°C) 50% RH |
15-45 |
|
Work Time, min @ 77°F (25°C) 50% RH |
25-35 |
|
Time to Handling Strength, hr @ 77°F (25°C) 50% RH |
6-12 |
| Paint Time |
Immediately; up to 30 days without a scuff |
Cured Typical Properties*
|
Hardness, Shore A |
50 |
| Tensile Strength, psi (MPa) | 200 (1.38) minimum |
| Lap Shear Strength, psi (MPa) | 200-500 (1.38-3.45) |
|
Elongation, % ASTM D412 |
400 minimum |
*Data is typical and not to be used for specification purposes.
Auxiliary Products
| LORD<sup>®</sup> 459T Adhesion Enhancer/Surface Modifier |
|
single-component primer in toluene solvent, for direct application; for promoting adhesion of thermoplastic elastomers (TPEs), polyolefins (TPOs) and EPDM Features and BenefitsVersatile - enhances adhesion to diffi cult-to-bond elastomers, increasing the adhesion of coatings, double-sided tape and adhesives. Easy to Apply - low viscosity allows for easy application; no mixing required. Convenient - requires very low dry film weights to enhance adhesion to coatings and double-sided tapes. |
| LORD<sup>®</sup> 459X Adhesion Enhancer/Surface Modifier |
|
single-component primer in xylene solvent, diluted for direct application; for promoting adhesion of thermoplastic elastomers (TPEs), Polyolefins (TPOs) and EPDM; meets California's VOC requirements Features and BenefitsVersatile - enhances adhesion to difficult-to-bond elastomers, increasing the adhesion of coatings, double-sided tape and adhesives. Easy to Apply - low viscosity allows for easy application; no dilution necessary. Convenient - requires very low dry film weights to enhance adhesion to coatings and double-sided tapes. |
| LORD<sup>®</sup> 7713 Adhesion Enhancer/Surface Modifier |
|
single-component, room temperature curing primer; for adhesive bonding of glass reinforced polyester substrates Features and BenefitsVersatile - enhances adhesion to a variety of substrates when utilized prior to most adhesive applications. Easy to Apply - low viscosity allows for easy application; no dilution necessary. |
| LORD<sup>®</sup> 7701 Adhesion Enhancer/Surface Modifier |
|
single-component, solvent-based surface treatment for various vulcanized, thermoplastic polymeric materials Features and BenefitsVersatile – functions as a cleaner and surface conditioner; treats a wide variety of elastomer functional materials. Easy to Apply – applies easily by wipe, brush, dip or flood methods. Convenient – requires no mixing. Improved Adhesion – improves adhesion to cast urethanes and cured rubber. Fast Drying – adhesion enhancer/surface modifier flashes off within five minutes or less. Environmentally Resistant – promotes increased environmental resistance by allowing the treated surface to be more easily wet. |
| LORD<sup>®</sup> AP-134 Adhesion Enhancer/Surface Modifier |
|
single-component, low viscosity, reactive polymer primer; for glass and ceramics Features and BenefitsVersatile - provides a wide range of product applications by functioning as a primer to a variety of polar substrates and as an adhesive for reaction injection molding (RIM) of polyurethane to glass. Easy to Apply - applies easily by spray, dip or polyester felt applicator. Convenient - requires only a single coat for most applications, reducing labor, solvent usage, inventory and shipping costs. |
Literature
| Download | Type | Name | |
|---|---|---|---|
 |
Technical Data Sheet | LORD 7610DTM Direct-to-Metal Adhesive/Sealant | |
|
|
Safety Data Sheet | LORD 7610DTM WHITE | |
|
|
Safety Data Sheet | LORD 7610DTM BLACK | |
|
|
Safety Data Sheet | LORD 7610DTM GREY | |
|
|
Application Guide | Structural Adhesive Bonding Application Guide | |
|
|
Selector Guide | LORD Structural Adhesives Selector Guide |