LORD® 7420 Urethane Adhesive Where To Buy
Product Information
LORD® 7420 adhesive is a single-component, moisture-cure urethane adhesive offering high peel strengths on difficult-to-bond substrates. It successfully bonds Hytrel®, chlorinated polyethylene (CPE), thermoplastic polyurethane (TPU), Nylon 11 and other thermoplastics to fiber reinforcements, such as polyester and Kevlar®, during construction of high-pressure hose.
Hytrel and Kevlar are trademarks of E. I. du Pont de Nemours and Company.
Shelf Life
Shelf life is six months from date of shipment when stored in clean, dry environment at 70-80°F (21-27°C) in original, unopened container.
After opening, protect adhesive from excessive exposure to moisture by using dry nitrogen as an inert cover each time material is removed. Do not return dispensed material to its original container. The viscosity of this product will increase over time.
Features and Benefits
Identifiable Appearance – blue color allows for easy identification on light colored substrates.
Non-Flammable – does not require explosion-proof equipment.
Convenient – requires no mixing; requires no ovens or other heat source for curing.
Environmentally Resistant – resists sunlight, weathering, humidity and salt spray.
Chemically Resistant – solvent resistant when cured. Painting and most cleaning processes do not affect bond strength.
Uncured Typical Properties*
| Appearance | Blue Liquid |
|
Viscosity, cP @ 77°F (25°C) Brookfield LVT Spindle 2, 30 rpm |
200 - 700 |
| Density, lb/gal (kg/m3) | 10.0 - 10.2 (1198 - 1222) |
| Solids Content by Weight, % | 55 - 60 |
|
Flash Point, °F (°C) Seta |
>200 (>93) |
Cured Typical Properties*
| Elongation, % | 250 - 350 |
|
T-Peel, pli (N/mm) Hytrel 5556 |
45 - 50 (7.9 - 8.8) |
*Data is typical and not to be used for specification purposes.
Auxiliary Products
| LORD<sup>®</sup> 459T Adhesion Enhancer/Surface Modifier |
|
single-component primer in toluene solvent, for direct application; for promoting adhesion of thermoplastic elastomers (TPEs), polyolefins (TPOs) and EPDM Features and BenefitsVersatile - enhances adhesion to diffi cult-to-bond elastomers, increasing the adhesion of coatings, double-sided tape and adhesives. Easy to Apply - low viscosity allows for easy application; no mixing required. Convenient - requires very low dry film weights to enhance adhesion to coatings and double-sided tapes. |
| LORD<sup>®</sup> 459X Adhesion Enhancer/Surface Modifier |
|
single-component primer in xylene solvent, diluted for direct application; for promoting adhesion of thermoplastic elastomers (TPEs), Polyolefins (TPOs) and EPDM; meets California's VOC requirements Features and BenefitsVersatile - enhances adhesion to difficult-to-bond elastomers, increasing the adhesion of coatings, double-sided tape and adhesives. Easy to Apply - low viscosity allows for easy application; no dilution necessary. Convenient - requires very low dry film weights to enhance adhesion to coatings and double-sided tapes. |
| LORD<sup>®</sup> 7701 Adhesion Enhancer/Surface Modifier |
|
single-component, solvent-based surface treatment for various vulcanized, thermoplastic polymeric materials Features and BenefitsVersatile – functions as a cleaner and surface conditioner; treats a wide variety of elastomer functional materials. Easy to Apply – applies easily by wipe, brush, dip or flood methods. Convenient – requires no mixing. Improved Adhesion – improves adhesion to cast urethanes and cured rubber. Fast Drying – adhesion enhancer/surface modifier flashes off within five minutes or less. Environmentally Resistant – promotes increased environmental resistance by allowing the treated surface to be more easily wet. |
| LORD<sup>®</sup> 7713 Adhesion Enhancer/Surface Modifier |
|
single-component, room temperature curing primer; for adhesive bonding of glass reinforced polyester substrates Features and BenefitsVersatile - enhances adhesion to a variety of substrates when utilized prior to most adhesive applications. Easy to Apply - low viscosity allows for easy application; no dilution necessary. |
| LORD<sup>®</sup> AP-134 Adhesion Enhancer/Surface Modifier |
|
single-component, low viscosity, reactive polymer primer; for glass and ceramics Features and BenefitsVersatile - provides a wide range of product applications by functioning as a primer to a variety of polar substrates and as an adhesive for reaction injection molding (RIM) of polyurethane to glass. Easy to Apply - applies easily by spray, dip or polyester felt applicator. Convenient - requires only a single coat for most applications, reducing labor, solvent usage, inventory and shipping costs. |
Literature
| Download | Type | Name | |
|---|---|---|---|
 |
Technical Data Sheet | LORD 7420 Urethane Adhesive | |
|
|
Safety Data Sheet | LORD 7420 |