LORD® 5206 Acrylic Adhesive Where To Buy
Product Information
LORD® 5206 acrylic adhesive in combination with LORD Accelerator 55GB replaces welding, brazing, riveting and other mechanical fastening methods especially over a wide range of temperature environments subject to high impact or high peel loads.
LORD Accelerator 55GB allows precise control of the adhesive bondline thickness due to its content of glass beads, 0.01" (0.025 cm) diameter. For further detailed information, refer to the LORD Accelerator 55GB data sheet.
Shelf Life
Shelf life is six months when stored below 80°F (27°C) in original, unopened container. Storage temperatures of 40-50°F (4-10°C) are recommended. If stored cold, allow product to return to room temperature before using. Protect from exposure to direct sunlight.
LORD 5206 acrylic adhesive is flammable. Do not store or use near heat, sparks or open flame.
Features and Benefits
Versatile - bonds a wide range of unprepared metals with minimal substrate preparation, as well as polymer composite substrates such as FRP.
Temperature Resistant - performs at temperatures from -40°F to +300°F (-40°C to +149°C).
Environmentally Resistant - resists dilute acids, alkalis, solvents, greases, oils, moisture, salt spray and weathering; provides excellent resistance to indirect UV exposure.
Non-Sag - remains in position when applied on vertical or overhead surfaces, allowing for greater process flexibility.
Typical Properties*
| Appearance | Off-white to Tan Paste |
|
Viscosity, cP @ 77°F (25°C) Brookfield |
100,000 - 220,000 |
| Density, lb/gal (kg/m3) | 8.35 - 8.80 (1001 - 1056) |
| Flash Point, °F (°C) | 53 (11) |
| Work Time, min @ 77°F (25°C) | 6 - 8 |
| Time to Handling Strength, min @ 77°F (25°C) | 24 - 28 |
| Full Cure Time, hr @ 75°F (24°C) | 24 |
| Mixed Appearance | Grey Paste |
*Data is typical and not to be used for specification purposes.
Auxiliary Products
| LORD<sup>®</sup> Accelerator 55GB |
|
mix-in accelerator; 4:1 mix ratio Features and BenefitsConvenient – provides room temperature cure with all LORD acrylic adhesives. Environmentally Recommended – contains no solvent, non-flammable and virtually odorless. Environmentally Resistant – resists common environmental conditions when used with LORD acrylic adhesives. Bondline Control – allows precise control of adhesive bondline thickness due to content of glass beads, 0.01" (0.025 cm) diameter. |
Literature
| Download | Type | Name | |
|---|---|---|---|
 |
Technical Data Sheet | LORD 5206 Acrylic Adhesive with LORD Accelerator 55GB | |
|
|
Safety Data Sheet | LORD 5206 |
Related Blog Posts
