LORD® 305-1/307-2 Epoxy Adhesive Where To Buy
Product Information
LORD® 305-1/307-2 adhesive is a general purpose, medium viscosity, two-component epoxy adhesive system designed for assembling food processing machinery, including gaskets, bushings, shock-absorbing devices and rubber rolls. It also provides excellent adhesion to prepared metals, prepared rubber and other materials. LORD 305-1/307-2 adhesive can be either room temperature cured or heat cured for faster processing.
Shelf Life
Shelf life is two years from date of manufacture when stored at 60-80°F (16-27°C) in original, unopened container.
Features and Benefits
Durable – provides load bearing properties equal to or greater than the materials being bonded.
Environmentally Recommended – contains no solvent, nonflammable and virtually odorless.
Environmentally Resistant – resists moisture, sunlight and weathering.
Temperature Resistant – performs at temperatures from -30°F to +250°F (-34°C to +121°C).
Chemically Resistant – resists dilute acids, alkalis, solvents, greases and oils.
Excellent Engineering Properties – provides low shrinkage, good creep properties and low water absorption.
Typical Properties*
| Work Time, hr @ 75°F (24°C) | 1-2 |
| Time to Handling Strength, hr | 8-16 |
| Cure Time**, hr | 24-48 |
| Mixed Appearance | Clear Liquid |
| Mixed Solids Content by Weight, % | 100 |
*Data is typical and not to be used for specification purposes.
**Can be accelerated by heat.
Guns and Accessories
| LORD-Pak™ 50 Manual Dispensing Gun | |
 |
handheld, manual dispensing system for small jobs
Features and Benefits• Approximate linear coverage of mixed adhesive, dispensed as 1/4” bead = 4.5 ft per 50 mL cartridge. |
| LORD-Pak™ 50 Replacement 1:1 and 2:1 Plunger | |
|
1:1 and 2:1 plunger for use on LORD-Pack 50 manual dispensing gun |
| Mixing Tip 0.25 x 6 x 21 elm. (package of 12) | |
|
0.25 x 6 x 21 element, package of 12 - For use with 50 mL |
| Mixing Tip 0.25 x 6 x 21 elm. (package of 144) | |
| 0.25 x 6 x 21 element, package of 144 | |
Auxiliary Products
| LORD<sup>®</sup> 459T Adhesion Enhancer/Surface Modifier |
|
single-component primer in toluene solvent, for direct application; for promoting adhesion of thermoplastic elastomers (TPEs), polyolefins (TPOs) and EPDM Features and BenefitsVersatile - enhances adhesion to diffi cult-to-bond elastomers, increasing the adhesion of coatings, double-sided tape and adhesives. Easy to Apply - low viscosity allows for easy application; no mixing required. Convenient - requires very low dry film weights to enhance adhesion to coatings and double-sided tapes. |
| LORD<sup>®</sup> 459X Adhesion Enhancer/Surface Modifier |
|
single-component primer in xylene solvent, diluted for direct application; for promoting adhesion of thermoplastic elastomers (TPEs), Polyolefins (TPOs) and EPDM; meets California's VOC requirements Features and BenefitsVersatile - enhances adhesion to difficult-to-bond elastomers, increasing the adhesion of coatings, double-sided tape and adhesives. Easy to Apply - low viscosity allows for easy application; no dilution necessary. Convenient - requires very low dry film weights to enhance adhesion to coatings and double-sided tapes. |
| LORD<sup>®</sup> 7701 Adhesion Enhancer/Surface Modifier |
|
single-component, solvent-based surface treatment for various vulcanized, thermoplastic polymeric materials Features and BenefitsVersatile – functions as a cleaner and surface conditioner; treats a wide variety of elastomer functional materials. Easy to Apply – applies easily by wipe, brush, dip or flood methods. Convenient – requires no mixing. Improved Adhesion – improves adhesion to cast urethanes and cured rubber. Fast Drying – adhesion enhancer/surface modifier flashes off within five minutes or less. Environmentally Resistant – promotes increased environmental resistance by allowing the treated surface to be more easily wet. |
| LORD<sup>®</sup> 7713 Adhesion Enhancer/Surface Modifier |
|
single-component, room temperature curing primer; for adhesive bonding of glass reinforced polyester substrates Features and BenefitsVersatile - enhances adhesion to a variety of substrates when utilized prior to most adhesive applications. Easy to Apply - low viscosity allows for easy application; no dilution necessary. |
| LORD<sup>®</sup> AP-134 Adhesion Enhancer/Surface Modifier |
|
single-component, low viscosity, reactive polymer primer; for glass and ceramics Features and BenefitsVersatile - provides a wide range of product applications by functioning as a primer to a variety of polar substrates and as an adhesive for reaction injection molding (RIM) of polyurethane to glass. Easy to Apply - applies easily by spray, dip or polyester felt applicator. Convenient - requires only a single coat for most applications, reducing labor, solvent usage, inventory and shipping costs. |
Literature
| Download | Type | Name | |
|---|---|---|---|
 |
Technical Data Sheet | LORD 305-1/307-2 Epoxy Adhesive | |
|
|
Safety Data Sheet | LORD 305-1 | |
|
|
Safety Data Sheet | LORD 307-2 |