Chemlok® TS701-54 Adhesive Where to Buy
Product Information
LORD Chemlok® TS701-54 adhesive is a high-solids, one-coat adhesive used to bond unvulcanized silicone rubber to various substrates such as metals, glass, plastics and textiles.
Chemlok TS701-54 adhesive also bonds specialty materials such as fluoroelastomers, polyacrylates, epichlorohydrin and some peroxide vulcanized elastomers.
Shelf Life
Shelf life is two years from date of shipment when stored at 21-27°C (70-80°F) in original, unopened container. Do not store or use near heat, sparks or open flame.
Features and Benefits
Versatile - provides excellent bonding characteristics between a wide variety of commercially available elastomer stocks and many diverse metallic and nonmetallic substrates.
Environmentally Resistant - creates strong bonds capable of withstanding salt spray, chemicals, oils, solvents, corrosive atmospheres and temperature extremes.
Durable - provides rubber tearing bonds that are stronger than the rubber, at high or low temperatures.
Easy to Apply - applies easily by brush, spray or dip methods.
High Temperature Resistant - capable of withstanding temperatures as high as 204°C (400°F) and below -51°C (-60°F) when bonding with fluoroelastomers or silicone.
Typical Properties*
| Appearance | Clear Straw Yellow Liquid |
| Density, kg/m3 (lb/gal) | 863 (7.2) |
| Solids Content by Weight, % | 10.2-11.4 |
|
Flash Point, °C (°F) Seta |
9 (49) |
| Solvents | Methanol, Ethanol |
| pH | 8.5-10.5 |
*Data is typical and not to be used for specification purposes.
Auxiliary Products
| LORD<sup>®</sup> LokRelease™ 100 Mold Release |
|
fast curing release agent designed for use with molded elastomers Features and BenefitsProcess Enhancer – provides quick, easy part release from molds; single application allows multiple molding cycles; improves molding efficiency in many processes including injection, compression and transfer molding. Improved Appearance – reduces defects caused by sticking; nontransferable to elastomer compound; does not interfere with compound chemistry. Environmentally Recommended – contains no Class I or Class II ozone depleting substances; contains no 1,1,1 trichloroethane or methylene chloride. |
| LORD<sup>®</sup> LokRelease™ 100EZ Mold Release |
|
fast curing, nontransferable release agent Features and BenefitsProcess Enhancer – provides quick, easy part release from molds; single application allows multiple molding cycles; improves molding efficiency in many processes including injection, compression and transfer molding. Improved Appearance – reduces defects caused by sticking; nontransferable to elastomer compound; does not interfere with compound chemistry. Environmentally Recommended – contains no Class I or Class II ozone depleting substances; contains no chlorofluorocarbon (CFC) or hydrochlorofluorocarbon (HCFC) propellants; contains no 1,1,1 trichloroethane or methylene chloride. |
| LORD<sup>®</sup> LokRelease™ 200 Aqueous Mold Release |
|
aqueous mold release is designed for use with molded elastomers Features and BenefitsProcess Enhancer – provides quick, easy part release; produces low build-up, allowing more production time between mold cleanings; improves molding efficiency in many processes including injection, compression and transfer molding. Improved Appearance – reduces defects caused by sticking; nontransferable, eliminating post-finishing problems. Environmentally Recommended – water-based coating is engineered to prevent rust and corrosion in steel molds. |
| LORD<sup>®</sup> LokRelease™ 300 Silicone-Free Mold Release |
|
silicone-free, nontransferable release agent Features and BenefitsProcess Enhancer – provides quick, easy part release; produces low build-up, allowing more production time between mold cleanings; improves mold efficiency in many processes including injection, compression and transfer molding of most rubber compounds including silicone. Improved Appearance – reduces defects caused by sticking; nontransferable, eliminating post-finishing problems. Environmentally Recommended – water-based coating is engineered to prevent rust and corrosion in steel molds. |
Literature
| Download | Type | Name | |
|---|---|---|---|
 |
Safety Data Sheet | Chemlok TS701-54 | |
|
|
Technical Data Sheet | Chemlok TS701-54 Adhesive |