Chemlok® 402X-HS Adhesive Where to Buy
Product Information
LORD Chemlok® 402X-HS adhesive is a solvent-based, one-coat adhesive designed for bonding textiles to a wide variety of unvulcanized elastomers. Chemlok 402X-HS adhesive is an all-xylene version of Chemlok 402 adhesive. It is composed of a mixture of polymers, organic compounds and fillers dissolved or dispersed in an organic solvent system.
Chemlok 402X-HS adhesive is used in the production of hoses, belts, diaphragms and other textile-reinforced rubber products. Chemlok 402X-HS adhesive can also be used as an additive to tie cements, primarily as a replacement for isocyanates that are widely used in rubber/textile bonding.
A single coat of Chemlok 402X-HS adhesive will bond compounds based on a natural rubber (NR), polyisoprene (IR), styrene-butadiene (SBR), polybutadiene (BR), polychloroprene (CR), nitrile (NBR) and butyl (IIR) to polyester, polyamide, cotton, rayon, and polyaramid. When dried, Chemlok 402X-HS adhesive is tack-free.
Shelf Life
Shelf life is six months from date of shipment when stored in a well ventilated area at 21-27°C (70-80°F) in original, unopened container. Chemlok 402X-HS adhesive is moisture sensitive. Do not store container outside. During summer months, minimize exposure of the adhesive to moisture by preparing only what is needed for several hours of use.
Once opened, fit the 55-gallon drum of adhesive with desiccant tubes if anticipated contents usage exceeds two weeks.
Features and Benefits
Non-chlorinated Solvent System – suitable for solvent incineration, saving cost of recovery equipment.
Versatile – bonds a variety of elastomers to a wide variety of textiles during vulcanization of the elastomer.
Excellent Adhesion – adheres well to RFL-treated fabric or cord, giving excellent adhesion to these materials. Chemlok 402X-HS adhesive treated fabric or cord can be bonded immediately following solvent evaporation.
Convenient – requires only a single coat for most applications, reducing labor, solvent usage, inventory and shipping costs.
Typical Properties*
| Appearance | Black Liquid |
|
Viscosity, cps @ 25°C (77°F) Brookfield LVT Spindle 2, 30 rpm |
600 - 1100 |
| Density, kg/m3 (lb/gal) | 916.7 - 970.6 (7.65 - 8.1) |
| Solids Content by Weight, % | 23 - 26 |
|
Flash Point, °C (°F) Seta |
25 (77) |
| Solvents | Xylene |
*Data is typical and not to be used for specification purposes.
Auxiliary Products
| LORD<sup>®</sup> LokRelease™ 100 Mold Release |
|
fast curing release agent designed for use with molded elastomers Features and BenefitsProcess Enhancer – provides quick, easy part release from molds; single application allows multiple molding cycles; improves molding efficiency in many processes including injection, compression and transfer molding. Improved Appearance – reduces defects caused by sticking; nontransferable to elastomer compound; does not interfere with compound chemistry. Environmentally Recommended – contains no Class I or Class II ozone depleting substances; contains no 1,1,1 trichloroethane or methylene chloride. |
| LORD<sup>®</sup> LokRelease™ 100EZ Mold Release |
|
fast curing, nontransferable release agent Features and BenefitsProcess Enhancer – provides quick, easy part release from molds; single application allows multiple molding cycles; improves molding efficiency in many processes including injection, compression and transfer molding. Improved Appearance – reduces defects caused by sticking; nontransferable to elastomer compound; does not interfere with compound chemistry. Environmentally Recommended – contains no Class I or Class II ozone depleting substances; contains no chlorofluorocarbon (CFC) or hydrochlorofluorocarbon (HCFC) propellants; contains no 1,1,1 trichloroethane or methylene chloride. |
| LORD<sup>®</sup> LokRelease™ 200 Aqueous Mold Release |
|
aqueous mold release is designed for use with molded elastomers Features and BenefitsProcess Enhancer – provides quick, easy part release; produces low build-up, allowing more production time between mold cleanings; improves molding efficiency in many processes including injection, compression and transfer molding. Improved Appearance – reduces defects caused by sticking; nontransferable, eliminating post-finishing problems. Environmentally Recommended – water-based coating is engineered to prevent rust and corrosion in steel molds. |
| LORD<sup>®</sup> LokRelease™ 300 Silicone-Free Mold Release |
|
silicone-free, nontransferable release agent Features and BenefitsProcess Enhancer – provides quick, easy part release; produces low build-up, allowing more production time between mold cleanings; improves mold efficiency in many processes including injection, compression and transfer molding of most rubber compounds including silicone. Improved Appearance – reduces defects caused by sticking; nontransferable, eliminating post-finishing problems. Environmentally Recommended – water-based coating is engineered to prevent rust and corrosion in steel molds. |
Literature
| Download | Type | Name | |
|---|---|---|---|
 |
Safety Data Sheet | Chemlok 402X-HS | |
|
|
Selector Guide | Chemlok Adhesives Selector Guide | |
|
|
Technical Data Sheet | Chemlok 402X-HS Adhesive |